Vano RGB

| Email | Print

Technical Information

Ground Fixture

Socket/Bulb: G5/T5 (excl.) 3x 35W

Material: Aluminum

Dimensions: W/H/D: 61.3/3.9/4.3 in

Accessory/Included parts:

Electronic ballast (incl.)

Mounting bracket (excl.)

Controller (excl.)

Note: Optimal operation of the lamps at ta +10°C up to +40°C. Below +10°C only operable with 100%. From +10°C dimmable. Controllable with LIM^®2 Controller (470531U), see below.

Versions: Art. No.:

stone grey 229401U

Recommended bulb: 35W red/green/blue 548175U/-6U/-7U

(see page 617 in Big Light 2012 catalog)

LIM^®2 Controller Design by CDC

Control voltage: 4x 1-10V

Material: Aluminum/plastic

Dimensions: W/H/D: 4.6/1.4/3.8 in

Accessory/Included parts:

Flush-mounted housing (incl.)

IR receiver (incl.) at the front of the housing.

Note: LC-Display. Flush-mounted installation possible. Short circuit protected! Optionally controllable via remote control (470530U), see below.

Versions: Art. No.:

stone grey 470531U

Accessory for Vano RGB

Bracket, short Art. No.:

Steel, silver grey, 229402U

2 pce.

Product-H: 3.5 in

Base-L/W: 1.9/1.9 in

Bracket, adjustable, short Art. No.:

Steel, silver grey, 229403U

2 pce.

Product-H: 7.5-10.6 in

Base-L/W: 2.4/3.9 in

Bracket, adjustable, long Art. No.:

Steel, silver grey, 229406U

1 pce.

Product-H: 7.5-10.6 in

Base-L/W: 2.4/3.9 in

For the wall installation of the Vano RGB, 3 brackets (229406U) are needed.

Accessory for LIM^®2 Controller

Remote control Art. No.:

Batteries (excl.) 470530U

L/W/H: 6.9/1.7/0.8 in

Weight: 19.5 lb

Benefits & Features

With a LIM^®2 controller 200 Vano RGB's can be controlled. When installing the controller please adhere to the maximum allowable power circuits (per 16 Ampere-Power circuit up to 30 Vano RGB.) The bulbs used must be identical and from the same manufacturer to provide a uniform color distribution. A data sheet can be sent to you upon request. The LIM^®2 controller makes setting up the color of light or light level possible with push button ease. 4 groups of lights with digital operating devices for a control voltage of 1-10V (e.g. fluorescent bulbs, low-voltage halogen, high-voltage halogen bulbs or LED applications) can be controlled, 4 pre-programmed light sequences can be selected. Also a dynamic operational sequence of light scenes is possible owing to selectable standing and blend over times. 4 different sequencing programs with 8 light scenes each are pre-programmed into the system. Additional features are a panic configuration, external switching entrance, variable time intervals. It is a intuitive system and no prior knowledge is needed to operate it.